For fans and ventilators

Electrical tools

Controller for pumps

Controller for Equipments

Controller for universal application

For RC models and Multirotors

other controllers
　
Tel：0755-84518082
Fax：0755-89372649
Add：5th Floor，Office Building，South Entrance，Delux Science and Technology Park，NO.8 East Lanzhu Road，Pin
E_mail：wqfreeman@vip.163.com xqsales@163.com
MSN：huhm0314@hotmail.com
    Product
Name:Program card for plane

 

    Program Card can display and modify the parameter item by the 4 digits LED and 4 buttons. When every parameter setting is done, push “write” key, all parameters can be saved into ESC automatically. The two of all parameters can be set quantificationally.

1. Low Voltage Protection Threshold: user can set proper voltage threshold according to cell quantity in range of 00.0-49.9V.

2. Start power: can be set in range of 00% - 29%. User can use different start power according to the different condition. Especially be suitable for ESC for Car and high-voltage ESC for Plane.

The keys function

KEY
WR

FUNCTION
To move the cursor horizontally. To modify the value which is more than one digit.
Two functions:
1. To browse every parameter.
2. To modify option or value of the parameter when entering this parameter item. The value is from 0 to 9 in loop.
Two functions:
1. When display a parameter item, press the key to enter this parameter item. Then the parameter value is flashing, user can modify the value.
2. Modifying is done, press the key to confirm the parameter value and exit.
Setting is done, press “WR” key to save setting parameter to ESC.

Program procedure

1.Connect the PPM wire of ESC to program card properly.

2.Connect the battery to ESC, program card will display “READ”, the program card can automatically detect the ESC is used for Car or for Plane and read parameters from the ESC.

3.Display the version of the ESC. If it is the ESC for Plane and will display “P x.x”; if it is the ESC for Car and will display “C x.x”, then display the first item after one second.

4.Press   key to browse parameter items.

5.Press  key to enter the item which needs to modify.  After entering the item, the parameter value is flashing.

6.Press  key to modify value (if the parameter value is more than one digit. press  key to shift to different digits.)

7.Press  key to confirm the modified value and exit.

8.Press WR  key to save the setting parameter to the ESC, and “good” will be displayed.

Configurable parameter with program card

When connecting Program Card and ESC, the program card can automatically detect the ESC is used for Car or for Plane and read parameters from ESC:

Item
Specification
Option or Value
Default
1.Cut Off Voltage
Low Voltage Protection Threshold
00.0V－49.9V
00.0V
2.StartPower Percent
Start Power Percent
00%－29%
00%(automatic)
3.Advance Timing
Timing Mode
(1)Low；(2)Mid；(3)High；(4)Highest
Mid
4.Brake Type
Brake Mode
(1)Off；(2)Soft；(3)Hard
Off
5.Start Mode
Start Mode
(1)Fast；(2)Soft；(3)Very Soft
Fast
6.Cut Off Type
Low Voltage Protection Mode
(1)Reduce Power；(2)Cut Off
Reduce Power
7.Throttle Curve
Throttle Curve
(1)Curve1；(2)Curve2；(3)Curve3
Curve1
8.Motor Rotation
Motor Rotation
(1) Forward；(2) Reverse
Forward

　
CopyRight 2016 Shenzhen Xingqiong Technology Co.,Ltd.